Odonata — 74mm fpv frame

thingiverse

This is going to be my first official frame release of 2022, so why not make it open source! A *nano* drone that fits in you pocket, rips like a boss, and hums like a dragonfly. Fit through the tiniest of gaps (it's only 20mm tall when built!!), and make small spots feel like a whole world. Better performance than a whoop, with the same batteries and components. Trippy spins, matty flips, inverted yaw spins, you can do it all. Weighing in at a mere 7.2 grams, this frame can mount a 25.5x25.5 board, or a 16x16. The Odonata has 6.6mm tri point motor mounting (the pattern found on 070x and 080x motors), with actual protection at the arm ends. A 74mm wheelbase keeps the footprint small while allowing the larger 40mm props for performance. If you would like to support future projects, I would be super appreciative if you got me a Arizona or a chocolate croissant ;) https://www.patreon.com/craftedkwads Getting this frame: In short time I will be selling this frame as a kit (CF, hardware, prints), as well as getting this on cncdrones.com and armattan productions. In the meantime, you can use these files to get this cut at the manufacturer of choice. All you have to do is send the .dxf files, specify your thickness, and wait! BOM: 1pcs toplate.dxf —1.5mm thick carbon fiber 1pcs bodyplate.dxf— 1.5mm thick carbon fiber 3pcs m2 standoff, 15mm 6pcs m2x6mm screw Recommended build BOM: -AIO (preferably with built in RX or VTX to save weight) -803 motors (060x, 070x,080x all work, as long as they have 6.6mm tri point m1.4 motor mounting. 80x motors are preferred because of stator volume) -Foxeer Pico camera (the best image quality you can get. generic whoop cams or the runcam atom can work as well) -40mm props -1s battery (whoop, 3xx mah) There is also an option for boomerang arms if you prefer that over unibody. They are identical, so get two boomerang arms cut and one boomerang body plate. Go wild!!