Oculus Quest Anker PD 10000 Holder

prusaprinters

<p>This is a holder for Anker PD 10000 for mounting it on the back of Oculus Quest strap allowing it to be used as a counterweight and giving you ability to extend your play time.</p> <p>It was made to be easily detachable so that you could fit Quest in the original Quest Case and you can fit the powerbank with the attachment in there as well. The powerbank itself is also easily removable from the holder if you want to use it for other things. but it's also minimal enough to not require removal without too much added footprint.</p> <p>The clips will deform slightly after use adjusting to the contour a bit but don't worry I've been using one for over 4 months and it's still great. It's designed for the powerbank to have the button and indicator lights on the top where the cutout is.</p> <p>The clips protrude a bit from the main body of the holder allowing for the back of the strap to still retain some contour.</p> <p>Holder also works with VR cover's strap padding you attach it to the tab in between velcro. It's a bit floppier then but still works reasonably well.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Supports:</strong></p> <p>Yes</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div><br/> <strong>Filament:</strong><br/> PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>Print on the side(the flat big part with supports only for the strap clips and the wall they are attached to.</p> Print with PLA as it is rigid enough for that thin clips</div></p> <p>Supports are a bit of PITA to remove from the spaces inside the clips and clips are as thin as possible (for comfort) so be careful removing supports.</p> </p></p> Category: Other