Oculus/Meta Quest 2 Case

thingiverse

This is a carrying case for the Oculus/Meta Quest 2. I designed this because I couldn't find any other case models. I plan on adding any updates/iterations/accessories as I make them. If you have any questions, please ask! Edit 3/21/2022: Added TPU Bottom Cover and Controller Holders. Both are optional, but keep everything in place and help to protect the Quest. Edit 3/24/2022: Added case without strap handles on the sides. This version fits on the Ender 3. Instructions: The dimensions of the case without the handles are 208x135x191, so it WILL work on smaller printers like the Ender 3. The necessary build area for the case with the handles is 233x135x191mm, so this version is NOT printable on some smaller printers. I printed with 15% infill to save filament and it felt sturdy, but I wouldn't recommend using any less. The strap holders may need supports when printing. The TPU Pieces should just slide/snap into place. The bottom cover will need supports and can be a bit tricky to get right. Assembly: Slide the bottom cover into the bottom of the case, Firmly press the controller holders into place. You can use whatever sort of handle you like. I tied one out of some shoelace, but I think a velcro strap would probably work very well! Use: The Quest 2 goes into the case first. After that, put the controller holder into place on the top and place the controllers in that as pictured. Credits: I recommend using a lens cover to keep the controllers from touching the lenses. Here's the one I used: https://www.thingiverse.com/thing:4705488 by warmans For the modeling, I used the following Quest 2 Scan: https://www.thingiverse.com/thing:4683038 by stevesch