Oculus Golf Club (v1)

thingiverse

It's designed to handle an Oculus Touch controller into a shaft of a real golf club to be used in __a game who allow to use theses__ specific controllers (Golf Club VR). Depending of the print and printer quality, it no need to print supports. I you recommand to print it with a standard infill of 20% for the try but if you are satisfied, print it to 100% to have more weight at the tip. It's better to have the shortest shaft. A longer shaft add more kinectic forces to the Oculus Touch and is not designed to be accelerated at a high G's and speed. --- Recipe -------- To craft it, take a golf club and cut his shaft near the grip (keep 21mm minimum) to have a diameter of 13.6mm maximum (you can have a lower diameter but you will need to fill the gap) and drill it a hole of 3mm of diameter from 21mm to the tip. For the assembly you need to have : - 2x M3 16mm screws - 1x M3 20mm screw - 3x M3 nuts Have fun ;) --- I will not be responsible for any damage or injury caused by the printed 3D objects. Printing as well as its quality is the responsibility of the end user. June 2020, version 0.1