Octobase Project for Necromunda/Zone Mortalis Terrain

thingiverse

The Octobase project. This is just a simple Terrain solution for miniature wargaming. The system is designed to be easily printed on an FDM printer. It's modular and can be assembled in as many ways as you can imagine. I like to friction fit everything together and never use glue. This way you can tear it down and store it away until it's needed. Print one Octobase, and 4 supports. The supports will snap into the notches on the Octobase. There is a variation on the support that has a ladder on it, I usually print 2 supports and 2 supports with ladders so the models have something to climb up. Print out several H clips (4 per level) to connect the 2nd story supports to the first story. 4x 2nd story supports per story you want to have. There is a variation of the 2nd story supports that also have a ladder, I usually attach these to the bottom supports that also have ladders. If you make more than one base/platform, print out a bridge to connect them. You can use the simple bridge provided or the more complex bridge: https://www.thingiverse.com/thing:6052340 You can use the 2nd story supports as base supports to have a lower platform, when you have them in this low configuration you can push them up against each other to create a larger playing area. I made some stairs which will attach to the Octobase where the bridge goes, you can find it here: https://www.thingiverse.com/thing:6052301 There are shorter stairs which work for the lower configuration: https://www.thingiverse.com/thing:6052334 Add some detail using my 28mm conduit boxes: https://www.thingiverse.com/thing:6053079 I hope all of that made sense, enjoy this simple modular system and happy wargaming!