OBI Rivet S DIY shelf additional holder for tapes.

prusaprinters

<p>I many tapes of adhesives. I need a way to store them nicely. The self was in place already, make use of those holes.</p><p>Mine is Prusament PETG</p><p><strong>The older design deformed at 14kgs, the new one held 10kgs without a hitch. I did not test it until the point of failure, 10kg is fine by me. </strong>I am gonna use 2 anyways with an M8 threaded rod across, so thats gonna be plenty strong. Print laid down flat, on its side.&nbsp;</p><p>&nbsp;</p><p>The rivet centerpoint distance is 40mm, hole size is 6mm, and the head of the rivet is 9mm , so it should fit every similar rivet holes. The fit is tight and loosey as well, depends how worn down the tool was on the sheet metal pressing machine. Somes holes snug some loosey-goosey. If its too lose maybe scale it a few percent.</p><p>&nbsp;</p><p>The shelf &nbsp;that i designed for. It is sold in Hungary, not sure about other part of the world, but as soon as the hole diameter and distance matches there should no issue regarding compability.</p><p><a href="https://www.obi.hu/polcok-polclapok/rivet-s-nagy-teherbirasu-fem-polcallvany-antracit-180-cm-x-75-cm-x-35-cm/p/4389946">https://www.obi.hu/polcok-polclapok/rivet-s-nagy-teherbirasu-fem-polcallvany-antracit-180-cm-x-75-cm-x-35-cm/p/4389946</a></p><p>Added an M10 version after seeing how much an M8 bends.</p>