Oberwagenlaterne

thingiverse

Oberwagenlaterne of the German National Railway (GDR) in scale 1:11 for models on 5" track. Dimensions: B 22 x T 20 x H 48 mm. The cover holder is attached to the cover and can then be clipped onto the body. The foot is glued to the body and fits into the Knupfer signal holder. The body is designed so that in the lamp housing, the upper 5.0 mm of an E5.5 screw fitting for miniature bulbs can be clipped on, with a cable soldered in, beforehand a M1.6 nut is inserted into the recess, to which the other wire is soldered. The two-wire cable can then be led out through one of the holes. On the front sides, there is a slot for a clear or red plastic sheet as a disc and the reflector element is printed twice and fits exactly in the gap. The rim is made from 0.8 mm thick brass wire bent into shape. Another brass wire fits as a splint into the foot and prevents loss. Printed with a 0.25 mm nozzle and 0.1 mm layer height in ABS. Support is needed for the body so that the bridge over the opening is printed halfway cleanly. The printed parts were then sanded and treated with Acteon steam.