
O Cedar Floor Mop Replacement Handle Yoke
prusaprinters
<p>This is a replacement yoke for the head of an O Cedar Floor Mop. My yoke which connects the handle to the head broke. This part is a snap in replacement.</p> <p>https://www.amazon.com/Cedar-Hardwood-Microfiber-Telescoping-Handle/dp/B06XWJV9PN</p> <p>You'll need to print with support for both the handle pocket and the head snap-in. I suggest for best strength to print in the orientation I provide the STL in. I printed mine in PLA at 80% fill which should make the part strong enough. Print in ABS If you want it even stronger. Once printed, clean out the supports and lubricate the part that snaps onto the head. If you can't get it to snap in, file a little bit of the slot until it will snap onto the mop head.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>HyperCube</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.1mm</p></div> <p><strong>Infill:</strong></p> <p>80%</p> <p><strong>Filament:</strong></p> HatchBox PLA </p></p> Category: Replacement Parts
With this file you will be able to print O Cedar Floor Mop Replacement Handle Yoke with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on O Cedar Floor Mop Replacement Handle Yoke.