Nut Version 1 Doc camera

thingiverse

Using the following options: Thread length is 20. A normal nut type is being used. The thread outer diameter is 4 millimeters. The resolution is set at 0.5 units per turn. Countersink holes are positioned 2 millimeters from each edge. A texture has been excluded. Head diameter measures 10 millimeters. Non-thread length totals 7 millimeters. Slot depth measures 2 millimeters. Nut height reaches 6 millimeters. Nut thread step size is set at 1.5 millimeters per turn. Step shape degrees are configured for 45 degrees rotation. The nut has been designed to produce 45-degree turns in its stepped outer surface. Inner diameter measures 8 millimeters. Thread step size is 1.5 millimeters. This model includes six facets on its curved surfaces. Wall thickness totals 2 units. Slot width averages 1 unit of length along each facet. A drive diameter has been set to 5 millimeters for turning operations. Type selection indicates a nut shape is desired in this design project. Socket head type preference has been registered at the requestor. The outer diameter, also known as the face-to-face dimension, spans an impressive 14 units around this component part. A socket drive will be implemented by designers within our CAD development team using the existing data provided so far. Diameter size measurements taken across each face show nut_thread_outer_diameter comes out to be five full millimeters at this specific setting value assigned previously earlier today somewhere maybe sometime before noon?