nut & bolt vertical for 1.0mm nozzle

thingiverse

I remixed this design specifically to make it compatible with 1.0mm 3D printer nozzles, which sets it apart from other files on Thingiverse that have finer threads that are challenging for 1.0mm to print. Printing with a 1.0mm nozzle at 0.3mm layer height allows this design to be printed in just minutes instead of hours that other nut and bolt sets take to print. I made significant changes to the original file, rotating both the nut and bolt by 90 degrees to avoid printing supports, which could ruin the threads. This redesign has also ensured a snug fit between the nut and bolt, eliminating the problem of the nut coming off too easily. Whether it's the file or the 1.0mm nozzle that made this necessary, I'm glad I was able to tighten up the design. I've successfully used similar designs in various projects to join parts by embedding nut threads into one part and printing a bolt onto another. This approach has proven effective in my experience. Please note that this custom nut and bolt size will not fit standard camera mounts; it's designed specifically for use with the original file I remixed from, which also required editing to fit any of my camera mounts.