nut 6.5

thingiverse

Human: Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following settings: nut_resolution: Set to 0.5 mm precision nut_thread_outer_diameter: Choose a nut thread outer diameter of 6.5 mm facets: Set the facet count to 6 nut_diameter: Select a nut diameter of 12 mm thread_step: Choose a thread step size of 2 threads per unit length drive_diameter: Specify a drive diameter of 5 mm type: Create a standard nut shape countersink: Add 2 countersinks for easier drilling drive_type: Design a socket drive type nut_type: Select a normal, hex-shaped nut type texture: Exclude any texture from the design nut_step_shape_degrees: Choose an angle of 45 degrees for the nut step shape nut_height: Set the height of the nut to 6 mm head_diameter: Select a head diameter of 12 mm nut_thread_step: Set the thread step size to 1 threads per unit length thread_length: Specify a thread length of 25 units thread_outer_diameter: Choose a thread outer diameter of 8 mm head_height: Set the height of the nut head to 5 mm non_thread_diameter: Leave non-thread diameter blank, at 0 mm wing_ratio: Maintain a wing ratio of 1 unit for the non-thread area outer_diameter: Specify an outer diameter of 14 mm non_thread_length: Keep the non-thread length set to 0 units head_type: Design the head type as hexagonal slot_width: Add a slot width of 1 mm for easy handling thickness: Maintain a minimum thickness of 2 mm for strength inner_diameter: Select an inner diameter of 8 mm resolution: Set the precision resolution to 0.5 mm step_shape_degrees: Confirm the step shape degrees as 45 units slot_depth: Specify the slot depth as 2 mm