Nut 6-3

thingiverse

Using the following settings, you can create a custom nut. Thickness is set at 2, with a resolution of 0.5 and facets equal to 6. The texture is excluded from this design. Nut dimensions: Outer diameter equals 14, inner diameter equals 8, head diameter equals 12, non-thread length is zero and the non-thread outer diameter is also zero. Design parameters: Countersink equals 2, wing ratio equals 1, type equals nut, slot depth equals 2, drive type equals socket, thread length equals 25, slot width equals 1, head height equals 5 and facet count remains unchanged at 6. Settings for threading: Resolution is set to 0.5 with step size equal to 2, non-thread outer diameter equals 0, nut resolution is the same as previously stated at 0.5 and thread step equals 2. Height settings include head height at 5 units, nut height at 17 units, drive diameter at 5 units, inner diameter also unchanged at 8 units. The remaining dimensions are as follows: Drive type, drive diameter, slot width, type, wing ratio and counter sink. The thread parameters have the following setting options. Resolution is 0.5, step shape degrees equal to 45, thread outer diameter is set to 8 and facets for thread outer surface also equals 6. The inner nut thread has no length. Thread step, counterclockwise and non-thread depth were not specified in your choices so their default values are assumed in this case. Please take these custom settings as options for a more unique approach when it comes to creating a design based off of your preferences for customization with specific criteria already decided upon within parameters provided through usage options for a desired look.