Nude Female Torso for vase mode

thingiverse

Recommended settings with a 0.4 mm nozzle: CURA: Special Modes -> Enable Spiralize Outer Contour S3D: Layer -> Single Outline in Vase Mode Slic3r: Print Settings -> Choose Spiral Vase NO SUPPORT REQUIRED! For 50% size, print at: Layer height: 0.11 mm Line width/Extrusion Width: 0.55 times the nozzle diameter Speed: 40 mm/sec or slower (20 mm/sec for walls) Minimum layer time: 2 seconds Temperature: +5C above ambient temperature Fan speed: 75% For 100% size, print at: Layer height: 0.13 mm Line width/Extrusion Width: 0.65 times the nozzle diameter Speed: 50 mm/sec or slower (25 mm/sec for walls) Minimum layer time: 4 seconds Temperature: +10C above ambient temperature Fan speed: 75% For 200% size, print at: Layer height: 0.17 mm Line width/Extrusion Width: 0.8 times the nozzle diameter Speed: 60 mm/sec or slower (30 mm/sec for walls) Minimum layer time: 6 seconds Temperature: +15C above ambient temperature Fan speed: 75% Note: The line width can be adjusted up to 0.8 mm, even with a 0.4 mm nozzle. Optimizations: Increase the head angle for better overhang performance. Lower the shoulders slightly for improved overhang. Reduce the pit above the clavicle for enhanced aesthetics. Maintain a proportionate body shape.