NPC Mask

prusaprinters

<p>I measured this to fit my face - haven't tried to print it yet but I suspect it will need supports.</p> <h3> Once I print it (in glow in the dark grey) I'll post some pictures - edit, ok the test print I've pictured here is not in GITD filament, but I will likely print one that way, perhaps an update without the ear hooks. (stay tuned) So the first print was too thin - came out ok considering but far from useful, so I updated the model (V1.5) to be a little thicker and brought the ear hooks all the way down to help with the printing process. It did enable me to test the fit and it works nicely! So I've posted the Simplify 3D Work factory file and the 3ds Max file I used to modify the original. Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK2.5</p></div><strong>Supports:</strong></p> <p>Yes</p> <p><p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>2.0mm </p></div><strong>Infill:</strong></p> <p>None</p> <p><strong>Filament:</strong> Amazon PLA Grey</p> </p></p> Category: Costume