Nozzle Light

thingiverse

Nozzle Lighting Ring for 60mm LED - A Simple yet Effective Solution I recently found a great eBay listing that showcases a Nozzle Lighting Ring for 60mm LEDs, which you can see here: http://www.ebay.de/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=60mm+Car+Angel+Eyes+Ring+12V+White+LED&_sacat=0 I successfully integrated the LED lighting into my Anet A8 printer by harnessing the power of its Extruder Fan. To do this, I carefully cut the wiring of the fan and connected the LED to both the fan's red wire and the 12-volt supply from the board, using a simple red-to-red and black-to-black configuration. Please be aware that you may need to modify your printer's settings accordingly. A big thank you goes out to my son for preparing this file and making it available for use in our community. Print Settings: Printer: Anet A8 Rafts: No rafts are used in this design. Supports: Supports are not needed in this model. Resolution: The resolution can be set to either 0.1 or 0.2 millimeters, depending on your preference. Infill: The infill density is set at 50%. Notes: To ensure that the LED ring fits properly inside the printed object, it's essential to pause the print job before the ring is fully covered using the Menu/SD Card option. If you want to change filament colors during printing, simply stop the printer, replace the filament, and resume the print job. To secure the wires in place, use some tape. Design Software Used: I designed this model using Autodesk 123Design version 2.2.14.