Nozzle Camera (5.5mm endoscope) Mount for Prusa Mini

prusaprinters

<p>This is a simple mount for a <strong>5.5mm</strong> endoscope camera for the Prusa Mini. You can find these for around $20 or less on Ebay/Amazon and can be hooked up to a Raspberry Pi or PC. Check the size before as most of the "standard" endoscope cameras are 1/3 inch or 8.5mm.</p> <p>Hardware Required:<br/> 1x M4x20 with nut for the fan mount<br/> 1x M3x6 for the set screw to keep the camera in place and not rotate while printing.</p> <p>Above screws are almost always included in the machine screw assortment packs you can find on Amazon/Ebay.</p> <p>Mounting instructions:</p> <ol> <li><p>Insert the camera in to the camera mount hole and set it in place with the M3 screw. Make sure to align the camera so that the image output isn't upside down. Take care to not to over tighten this screw as you can damage the camera casing.</p> </li> <li><p>Attach the mount to part cooling fan's bottom hole using the M4 screw and nut.</p> </li> </ol> <h3>Print instructions</h3><p>As this is a part for the printer, I recommend printing it in PETG to match the rest of the printed parts on the Prusa Mini. You can print this in PLA as well if you'd like.</p> <p>Printed at 0.2mm.</p>