Nose shower holder

thingiverse

This is a nose shower holder fitting to the "Neti Pot" made out of stainless steel available at Amazon. It also has a stand for a Nalgene box (125ml) for storing the salt. Stick to the wall using water proof power strips. Use two DIN 912 M3x8 screws and two M3 Nuts for attaching the shower holder. Print Settings Printer: Prusa i3 MK2 Rafts: No Supports: No Resolution: 0.2 Infill: 15% - 20% Notes: Printer settings I successfully printed this on a Prusa MK2 using the slic3r in PLA. Layerhight of 0.2mm was used with a 0.4mm nozzle. Salt holder Infill: 20%, Honeycomb Perimeter: 6 Top: 0 Bottom: 0 Shower holder Infill: 20%, Honeycomb Perimeter: 3 Top: 3 Bottom: 3 Wall part Infill: 15%, Honeycomb Perimeter: 3 Top: 3 Bottom: 4 remark: Use bridge detection and make sure that (if using my support) the first bridge level is vertical. Additional parts 2x DIN912 M3x8 screw + 2x M3 nut Nose shower: https://www.amazon.de/gp/product/B00MVKQKII Nalgene storage Box: https://www.amazon.de/gp/product/B00BISQJ9Y?th=1&psc=1 Power strips: https://www.amazon.de/gp/product/B005DRDUXE Changelog 2017-01-02 initial version 2017-01-03 uploaded version v1.1 of wall part. Optimized position of top holding brackets and made the nut clearance slightly bigger.