Non Magnetic Plate Holder

pinshape

I realized using all four magnetic mounts on my Creator Bod 3D printer caused the magnets to pull the plate into a slight warp, making it impossible to level the bed. By switching to just the front two L-shaped brackets with the metal tabs removed from the front of the plate, the warp issue was resolved. I've included all four magnetic mounts; I only used the front two. Installation: 1 - Remove the two tabs attached to the front of the plate. 2 - Swap the two stock brackets for the two newly printed ones. (You might want to apply a thin coat of rubber cement to the bottom of the bracket to prevent it from rotating when leveling the bed.) 3 - Obtain a piece of thin double-sided 3M tape, not foam tape. You'll need one side to adhere to the bracket and work towards the glass so that it's just tacky without sticking to the glass plate. This will eliminate any shifting of the glass plate. 4 - Level the bed and enjoy!