Nokia 5100 housing

thingiverse

The housing lacks holes for the data cable and IR-port. The housing features a cut-out for the earpiece but does not include an earpiece cover part, which might be added in the future. The model is optimized for a 0.25mm layer height. You may need to adjust your slicer settings' XY tolerances/scales for the buttons despite the models already having some tolerance built-in. Print parts: * Front piece - 1 * Back piece - 1 * Small key button - 8 * Big key buttons - 12 * Volume buttons - 2 * Power button - 1 (has a slightly longer leg compared to volume ones) Other parts needed: * M2/6mm screws - 6 * Hot-mount nuts M2/3mm - 6 Assembly Instructions: * Drill 4mm holes on the back piece from the outside, depth approximately 6 mm. * Drill 3mm holes on the front piece from inside, depth approximately 4mm. * Embed 6 nuts into the front piece using an iron. * Place keyboard button pieces into the front piece (8 small, 12 big ones). * Insert phone body into the front piece. * Cover it with the back piece starting from the bottom. * Tighten 6 screws. Source CAD files: https://cad.onshape.com/documents/3d522a9277fbc70681bdd595/w/0c9702bf7bd39400b6c4a5dd/e/108036b45863d7b1849d415b