NO GLUE Among Us Crewmate print-in-place multicolor

thingiverse

Subí un video que explica todo el proceso de la impresión, el enlace está abajo. Por si acaso, se reutilizan los STL del visor y lente del modelo original: https://www.thingiverse.com/thing:4661083 First of all, thank you WalRit for the great model! This is my favorite crewmate model out there!!! I have uploaded a video all about the setup required for a successful print, link is at the bottom (English subtitles included). The basic concept is a conical shape ("the plug") that can be assembled from within the visor which acts as a retaining feature. It inserts through the rim piece and everything is pinned in place by anchoring into a T-slot in the head of the body (similar to the way we affix stuff to our 3d printer's aluminum extrusions). Things are a little loose on purpose to allow for it all to slide into place. I am using here a 0.6 line width with 3 perimeters. I have included 4 different bodies with a range of increasing clearances between the base of the visor/rim assembly and the inside wall of the slot. In PrusaSlicer I am able to use the 0 model for 0.28 layer height; in Cura I have to use the +0.12 model in order for the middle perimeter to be fully included around the slot when also slicing at 0.28 layer height. You'll need to pause the print at roughly 49.00mm (JUST BEFORE the model starts bridging over the rim & top of the slot). Be within a layer height of that - if you stop too early you risk crashing with the nozzle or the fan shroud. Optimally, use a pause sequence that parks the printhead *behind* the back of the crewmate. No supports are needed for the plug pieces. For the body, you'll need to support the backpack. This remix was intended for the scale of the original; I have no idea how far your printer can go in either direction before things start crashing or not fitting. Always print a test piece first! https://youtu.be/cv_wI3WDyKA