Nivelamento com mola para Stella

thingiverse

<h3>Leveling System for 3D Printer Stella's Print Bed with Springs</h3> <p>This is an alternative to making small adjustments via software. It's much faster and easier.</p> <p><b>Note:</b> If your printer is still under warranty, consult support to check if you won't void the warranty.</p> <p><b>Note 2:</b> The part that holds the mirror was made for the original mirror with a thickness of 3mm.</p> <p><b>Note 3:</b> After installing this kit on your 3D Stella printer, you'll need to level it according to the manual provided by technical support (found in the Stelleiros forum).</p> <p>List of Materials:</p> <ol> <li>4x M3x20 screws (If possible, get the cylindrical head type)</li> <li>2x nuts</li> <li>4x springs (If you have trouble finding them to buy, you can use clothes hangers that have a spring. Credit for the idea: Glauco Nicodemus)</li> <li>1x extension_left</li> <li>1x extension_right</li> <li>4x mirror_clip</li> <li>2x front_elevator</li> <li>2x back_elevator</li> </ol> <p>The elevators use the wheel that comes with the Stella. To attach the extensor to the structure, you can use the screws from the Stella itself with the nuts mentioned in the materials list above.</p> <p>After printing, to level, simply turn the wheel that holds the screw below so that you can lift or lower each point.</p>