Nintendo Switch (Plate) for MMU or Dual Extruder

prusaprinters

<p>I started with <a href="https://www.thingiverse.com/FITPrinting">FITPrinting</a>'s version of this, but the holes weren't aligned to fit any of the light switches I had and it was very difficult to print without supports.</p> <p>This is a redesign for MMU/Dual Extruder printers. But, it only involves 7 filament changes, so, virtually any printer could do it with a little bit of patience.</p> <p>This can also be 100% printed without supports. Just print it with the front face of the plate down on the print bed.</p> <p>I printed it red on white and white on red and decided that the white on red combination worked best for my son's room. YMMV.</p> <h3>Print instructions</h3><h3>Category: Decor Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa<br/> <strong>Printer:</strong> i3 MK3 MMU 2<br/> <strong>Rafts:</strong> No<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> 0.15 mm<br/> <strong>Infill:</strong> 15%<br/> <strong>Filament:</strong> Overture Pro PLA Red &amp; White</p> <p>NOTE: The gcode file uses "extruders" or MMU filament positions 3 (white) and 4 (red).</p>