Nintendo Switch Hard Case / Box

thingiverse

IMPORTANT NOTE :- THIS WAS DESIGNED FOR MY OWN USE AND I POSTED IT HERE FOR EDUCATIONAL PURPOSES. I'M NOT RESPONSIBLE FOR ANY DAMAGES TO YOUR SWITCH OR ANYTHING THAT HAPPENS DUE TO THE USE OF THE CASE. This is a custom case I designed for the Nintendo Switch, and I had trouble finding a suitable pouch locally, so I created this case to protect my switch so I can easily chuck it into any other bag. This should be used as a standalone case unless you feel very confident in your ability to join the parts together. WARNING: The cover cap does not lock! And the weight of the Switch will push it open if turned upside down! Please watch the video carefully to identify the contact points where you need to apply foam padding to prevent screen rubbing on the case when inserting the Switch. If you're curious, the case shown was printed using PETG. Print Settings: Printer Brand: Up! Printer Model: Up Mini Rafts: Not required Supports: Yes Resolution: 0.25MM Infill: 25% Notes: Two pieces of the shaft are needed to form the case. I recommend printing the cap and A shaft first to see if your printer tolerance will allow for a 0.1MM gap on the cap to fit over the shaft properly before continuing. Rotate the parts so they print vertically, requiring minimal support material. Supports are mainly used for the rounded edges on the caps. If you want really tight connections that might not require any adhesives to finish up, try using the 0MM gap connector parts, resulting in a very tight fit between the parts. However, depending on your printer accuracy, they might not even join together! Post-Printing: Demo video and assembly instructions are available. Watch The Video for more information. Remember to secure all connectors so the case doesn't disassemble itself!