Nintendo Joycon single Grip 2.0 with LED reflection - left
thingiverse
Printing with a 0.3 nozzle at maximum speed! 20% infill will do just fine, no need to overdo it. You'll need some support for this one, or it might not hold up well. Printing with a flat side face down is the way to go, stay on that side! Grip parts and buttons require special attention: Printing with a 0.5-0.8 nozzle will save you some time, And flex filament makes everything so much easier. Print it with the flat side facing down again! You'll need 4 buttons and 8 dowels to make one grip work properly, No support necessary here, that's for sure! Infill is not needed either, we're good without it. Update: New main part design includes a safety mechanism.
With this file you will be able to print Nintendo Joycon single Grip 2.0 with LED reflection - left with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Nintendo Joycon single Grip 2.0 with LED reflection - left.