NInja Flexy Arm II ENABLE

thingiverse

This prosthetic solution can only be adapted in a patient older child or adult to 3 years under the guidance of a health professional, therapist, physical therapist, physiatrist and with the help of a professional in psychology. Please read the safety manual and use of this prosthetic solution carefully first. Design Artist: Wilmer Garcia The mechanical concept is that of Ing. Mecatrónico Christian Silva. Deadpool Flexy Arm II ENABLE is a project designed and developed by artist Wilmer A. Garcia P., a student at the National University of Colombia, and directed by Cristian Silva, Mechatronic Engineering PhD student at the National University of Colombia. The model is based on the Flexy arm of Christian Silva, The Flexy_Hand 2 of Steve Wood (Gyrobot), arm RIT (Rochester Institute of Technology) e_NABLE work group. The project was developed by the team e-Nable Colombia and 3D materialization Foundation in Bogotá, with the participation and support of Recreartech in the process of 3D scanning and Realiza3D part of. All these files are covered by the common creative license attribution goods, non-commercial, please use the reference to us if you want to print. All parents and children were informed about the study and research for the development of this work. For children 3-16, consent was explained by the principal investigator and signed by the children and their parents. Written informed parental consent was obtained in order to publish the pictures and videos that appear in the research study and research. Detailed safety guidelines were given to parents about the use and care of prosthetic arm. Detailed safety guidelines link: http://enablingthefuture.org/build-a-hand/safety-guidelines/ The fingers are printed on Flexy materials, hand, forearm, arm and other parts of PLA material. For more information on 3D materialization, E-Nable Colombia and E-Nable Foundation: https://www.facebook.com/materializacion3d/?fref=ts e-nable.co Colombia - Materialization 3D / Bogota Foundation Print Settings Printer Brand: Printer: Prusa I3 Rafts: Does not Matter Supports: Yes Resolution: 0.15 mm Infill: 80% Notes: Print Settings Printer Brand: Printer: Prusa I3 Rafts: Does not Matter Supports: Yes Resolution: 0.15 mm Infill: 80% Post-Printing Once the prints are made, a process of thermofoming is required. Heat the pieces with a hot air gun to shape the flat parts corresponding to the arms.