Nimble V1 print head for Creality type.

thingiverse

#### Agile family Version 1 is no longer sold, we have announced Version 3. For the print head kit for the Agile Version 3 family, have a look at [Agile and Sidewinder V3 mounts for the Creality type print heads](https://www.thingiverse.com/thing:3925474) #### Changelog -30 Added Dual fan duct for the Dragonfly. -29 The BL Touch now has a mount that will allow it to be used with the Ducting 5015 Dual Sensor. It places the BL Touch far enough away to clear the duct. Offset in X is 45mm. -28 Thank you, Leo, we rebuilt the Dual ducting for the 5015 fans. It now fits better and gives a little more space. -27 Added a Dual 5015 duct that allows a new induction sensor. -26 R3 figured out that the Ducting_4010 hits the fan mount in the V6 mount, so I changed the duct. -25 Added mount for the Chimera/Cyclops+ Aqua hot ends. Also added a 5015 brace for on the V3. -24 Added Hotend shroud for the CR-10Pro type backing plate. -23 Added two ducting forms, having a spot to attach an endoscope. Also added a fan brace for the 5015 fan. -22 Changed both ducting parts to give enough space for a 40x40x20 hot end cooling fan. #### Description Modular print head to mount a Zesty Agile on the Creality type print heads. This covers a wide range of printers. The hot end mount is compatible with both the original hotend and the MicroSwiss hotend. There are two other versions, for the Sidewinder. With the drive cable pointing backwards: https://www.thingiverse.com/thing:3629285 With the drive cable pointing to the left: https://www.thingiverse.com/thing:3629236 There are two versions of ducting, one for the original fan and one for a 5015 radial fan. Also included is a mount for the BL Touch and a mount for an induction sensor, like the one mounted on the CR-10Pro. The offset for the BL-Touch is: X+30.4 Y+2.5 For the induction sensor it is: X+35.3 Y-6.9 All sensor mounts and ducting is height adjustable. Printing: Only the hotend shroud needs to be printed with support. Make sure you switch off the support generation when printing the ducting. The exit holes in the ducting have little braces to make the printing easier. Remove these before installing it. All of these parts can be printed using PLA. The temperatures stay low enough not to bother the PLA. Additional fasteners: Over and above the fasteners that come with the Agile or are re-used from the print head, you will need: 4 x M3 nuts 3 x M3x10 For the 5015 Fan you will need 1 x M3x25 And depending on which shroud you are using, you will need a few M3x30 long. For our USA friends, it is easiest to buy a kit like this: [M3 fastener kit](https://www.amazon.com/iExcell-Metric-DIN912-Stainless-Assortment/dp/B07J44YXV4) For the print head kit for the Agile Version 2 family, have a look at [Agile and Sidewinder V2 mounts for the Creality type print heads](https://www.thingiverse.com/thing:3925473) The STL models are checked and optimised. The parts that need a different orientation to print properly are rotated to the preferred printing position. #### The Agile Extruder With an installed weight of less than 28 grams on your carriage/effector the Zesty Agile is the smallest and lightest extruder you can buy, it has ample torque and can be mounted in multiple orientations. The Agile is available from [Zesty Technology.](https://zesty.tech)