Nimble V1 Mount on OpenBuilds anti backlash nutblock

thingiverse

Changelog:\r\n\r\nV2\r\nTightened up the mount significantly to make it rock solid. This also freed up space to add rails, allowing you to attach a BL-Touch sensor or other accessories if desired. \r\nThe BL-Touch mount has been added. You can use that file as a starting point to modify for different sensors. It could also be used to secure a part cooling fan. \r\n\r\nUPDATE: The adapter proved to be slightly too flexible in one area, causing the Nimble and V6 to bend when pushed hard. We decided to redesign the adapter from scratch. Before releasing the new design, we want to ensure it meets our stiffness requirements. \r\n\r\nA small bracket to mount a Nimble (and a V6) onto an OpenBuilds anti-backlash nut block has been designed. This block is modified to fit perfectly onto a MGN-12C slider (additional holes were added). \r\nOne of our customers, a true innovator, requested this and it was challenging to get right without compromising print volume or "printability". Now the mount can be printed in two orientations. \r\n\r\nSimply attach the mount and nut block to the slider, insert the V6, slide the standard Groove mount adapter over the top of the V6, and then mount the Nimble. This is a very straightforward setup. \r\nAn optional clamp for the V6 has been added. If you want extra security or need to use the mount without the Nimble, you can use the clamp to secure the V6 in place.\r\n\r\nThe STL models have been thoroughly checked and optimized. The parts that require a different orientation to print correctly have been rotated to the preferred printing position. \r\n\r\n#### The Nimble Extruder\r\nWith an installed weight of less than 27 grams on your carriage/effector, the Zesty Nimble is the smallest and lightest extruder you can purchase, offering ample torque and versatility in mounting options.\r\n\r\nThe Nimble is available from Zesty Technology.