Nikon F2 Finder Light

prusaprinters

<p>This is a file for a Light to illuminate the light meter and shutter speed within the finder of a Nikon F2 when ambient light is not strong enough to do naturally. The device fits snugly on my F2 and does not fall off easily even if the camera is inverted, but still is easily removed by hand.</p><p>The device prints in two parts that need to be glued together with your preferred adhesive. You will also need 1 led and a CR2032(or similarly sized battery).</p><p>&nbsp;</p><p>Parts are modeled in Imperial units, you may be prompted to convert to metric within your slicer</p><p>&nbsp;</p><p>------------------------------------------------------------------------------------------------------</p><p>Building:</p><p>The building is pretty simple.</p><p>Once the parts are printed insert the led's longer lead into the main channel and slide it into place until the back of the led is up against the housing.</p><p>Glue the lead to the bottom of the circular hole where the battery goes. You can also glue a piece of aluminum foil on top to help hold the lead in place.</p><p>Now glue the cap over the top of the led. make sure the channel for the led lead in the cap lines up with the channel on the main body.</p><p>lastly, you may need to do some minor sanding on the bottom if light is escaping. (this step is more aesthetic than functional.)</p>