NieR Reincarnation - Noelle/Sealed Girl Spear [Si'F-06proto]

cults3d

This model is designed for Noelle/Sealed Girl cosplay from Nier Reincarnation. It is separated into 4 main part, Head, Body, Pole and Pummel. To fit in my Ender 3, I cut them into pieces that can fit in printer with 200mm x 200mm x 200mm platform. All the pieces are cut in easy print in mind. I do include the un-cut version for all the parts as well just in case you want to cut it yourself or you have a bigger printer to fit in. All the pieces come with a flat face that can lay on the printing bed easily. Some support is needed on the hanging part for tunnel that punch through the model for bone installation. To get the pieces that you want, you can refer to the picture in the preview section. I do label all the parts with their file name respectively. Once printed out the pieces, you can glue pieces a and b together using PLA glue or super glue after removing the support on the tunnel area to form a part. The diameter of the tunnel is around 10mm. You can use metal or wooden rod with diameter not less than 7mm as bone. If you use bone with diameter smaller than 7mm, I will suggest you pump some hot glue into the tunnel before you insert the bone to hole the bone in place. For the pole, you can print them in upward position to avoid using any support. You can print multiple copies from either Pole 2, 3, 5, 6, or 7 to extend the length of the prop. For scaling, please use the same scale factor for all the pieces. Cheers and happy printing!