NieR Automata - Type-40 Sword

cults3d

This model is cut into 16 pieces to fit in my Ender 3 with 200mm x 200mm x 200mm platform. You can refer to the picture of pieces labelled according to their file name in the preview section to get the part you want to print. An uncut file also included just in case you wish to cut it yourself. All the pieces come with flat face that can lay on the printing bed easily. However, there is some slant faces which will result in "staircase" artifact on the surface. It can be fix by applying filler during the post process work for a smooth slant face. You can print it in upward position if you want to minimize the "staircase" artifact which will result in more support and printing time needed. Glue all the pieces together using super glue or other type of adhesive to complete the prop. The tunnel that punch through the prop are 5mm in diameter. It can be used for alignment or bone installation purpose. You can print the file "peg4.5" included if you can't find anything that can help in the alignment process. It is a cylinder with 4.5mm diameter. Since the total thickness of the prop, especially on the blade part is quite thin, please be extra careful when removing the support on the tunnel. For scaling please use the same scale factor for all the pieces. Cheers and Happy Printing.