Niche Zero blower and single dose bean container 2 in 1

prusaprinters

Reduce left over coffee powder, enables burr spinning before grinding, also act as a bean weighing cup.Print the moving part with TPU, 0.12mm layer height is recommended. Star shape cut facing the bed.For the lower part, use some double-sided tape to stick the lower part to the Niche Zero. The cone shape should be facing the bed. Add some inner brim to stabilize the print.The upper part should fit well with the moving part, thus need no glue nor tape. The flat part should be facing the bed.  I had a try printing it in vase mode, using 0.9mm width (although with 0.4mm nozzle), I forced the base to be at least 60 layers, thus give it the two rings as in vase mode. The extra width gives more strength. And the vase mode can produce a seamless result (altough the beginning of the actual vase part has a slight circle inside, as the wall became from 1 to 2).多跟国内玩家提一句，我准备在闲鱼卖这个，所以自己打打就得了不要跟我抢生意哈~