Nice wooden lithophane stand

cults3d

Nice square lithophane stand 86x86x65 made with wood pla and white pla base. Entering lithomaker.com and attaching the 5 photos that you like the program is very simple to use will create an STL file ready to print vertically and 100% fill with a layer height of 0.1 to 0.14 depending on the quality you want. The dimensions of the lithophanes should be from. length:69mm Height:55mm and width:3.6 mm (For later insertion into the wooden PLA structure, they can be scaled in the lamination process itself). The part printed on wood : Filling 25% Support :yes Lower Base 25% Filler Support : only by touching the printing plate. There are two types of bases, one prepared for battery operation and the other designed to be connected directly to the mains. BATTERY: Housing 3.7 500mah(20X35X6) battery,a mini switch and 4 translucent white LED (to diffuse the light ) or the color you want and 3.7V battery charging plate (Micro usb). to make the necessary soldering and ready. CONNECTION TO THE NETWORK: Insert a two-wire hose already peeled at its end through the outer hole, place the GU5.3 bulb socket in the central part and rivet the plastic bolts so that it is fixed then make the splice of the wires and seal them later we place a switch or a dimmer if the LED we have bought is dimmable we put a plug and that's it. And done.