Nice desk Lamp

thingiverse

This is a desklight. It consists of four parts: The base "pied low poly.stl" A small lampshade "lampe shade V3 - low poly - petit.stl" A large lampshade "lampe shade V3 - low poly - grand.stl" An adapter to mount E14 or E27 light bulbs Both lampshades can rotate on the base, allowing you to direct the light. I designed the part supporting the light bulb socket to be removable, so anyone can create an adapter for other light bulb sockets. I created adapters for e14 and e27 socket sizes. Print Settings Printer: Rostock modified Rafts: Doesn't Matter Supports: No Notes: The base part is hollow. If your printer can handle 60° slope, you should be able to print the base part without supports, reducing the print time. The base is printed with wood filament using .3mm layer thickness. Both lampshades are designed for 0.5mm extrusion width. I printed them at 20% infill. I am sure that support may ruin the print of the small line on these parts. I used a .15 mm layer thickness. The "rondelle" is simple, so any settings should work. Post-Printing Step 1: Print the parts Print the base, both lampshades, figure out which size of light bulb you want to use and print the corresponding adapter. Step 2: A bit of assembly Mount a light bulb socket on the adapter and put it in the base Step 3: Final assembly Mount the larger lampshade on the base first, then mount the smaller one. You are done !!