Ni No Kuni - The Locket

pinshape

This design of the Locket from Ni No Kuni is solid and can be closed with a snap lock. There are also models for three heart pieces, so you can print your own Locket full of excitement! For the basic version print: the_locket_unicolor_body.stl the_locket_unicolor_heart.stl For the assembly version use different colors or materials: the_locket_golden_heart_flat.stl the_locket_golden_ring.stl 2x the_locket_green_heart_half_solid.stl or 2x the_locket_green_heart_half_thin.stl (for more transparency) the_locket_green_top.stl the_locket_green_bottom.stl Size: Approximately 8cm x 5cm x 5cm Print Settings: Use 80%-100% infill for all parts except for the the_locket_unicolor_heart.stl, which can be printed with just 15-20% infill. Print without support. Print slow and with small layer height (0.1mm) to achieve good detail and surface finish, especially if you do not want to post process the parts Let me know if you have any questions.