Nextion Dash Housing for Fanatec DD1 DD2 Simrig Sim Racing Simhub

thingiverse

Case and mount for Nextion 5.3" display with shiftlight option ============================================== This fits onto the 4 threaded holes on the front of the Fanatec DD1 and DD2 and maybe the DD pro, but I don't have one to confirm. In action: https://youtu.be/Z5oJfF32AcU Electronics --------------- I used this youtube video for the shift light: youtube.com/watch?v=zzOeTT6klBE Arduino: Nano v3 RGB LEDs: https://www.amazon.com/gp/product/B01CDTE6Y6/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Nextion 5.3" display: https://www.amazon.com/gp/product/B07QWS2N48/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 I swapped the TTL > USB converter from the one the comes with the display to this one as its quite a bit thinner: https://www.amazon.com/gp/product/B088P5FS21/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Follow the simhub wiki for Nextion setup: https://github.com/SHWotever/SimHub/wiki#nextion-end-of-support Supports ------------ Limited supports between the Nextion and RGB LED slot. Fasteners ------------- I used brass threaded inserts you can press in with a little bit of heat (I used my soldering iron) and 3mm counter sunk stainless screws. Options ---------- Included in the files are both a Nextion only display housing and a combo to also include a shift light above the Nextion display. The fit is tight for the LEDs by design. All electronics fit in the housing behind the display but its also tight. Programming ------------------ This is the easiest part as its all basically handled by simhub.