New D-Bot Mount for Nimble V1

thingiverse

Change log: 5: Added a mount to move the whole hotend and fan down by 20 mm. This adjustment allows for a better fit with the original design. Thanks go to JediKnight2. 4: The BL Touch rails were modified. The back wall of the nut pocket was removed since the rails are glued onto the clamp, making an additional wall unnecessary. 3: An Induction sensor mount was added. 2: Special thanks to fr3tles5 for spotting a part that interfered with the hot end, just slightly but still enough to require removal. Both mounts were updated as our models in V6 differed. 1: The Air ducting file was edited slightly to improve fitment. Additionally, an air duct with no ring around the nozzle was added. 2. The offset for the BL Touch is 24.5 mm left and 8.8 mm forward. The adapter is designed to mount a single E3D V6 and a Nimble to the D-Bot. This design will be attached to the only true "D-Bot Core-XY 3D Printer", available on https://www.thingiverse.com/thing:1001065, courtesy of the great Spauda01. Developed in collaboration with Darkarchon, this version is significantly stiffer than its predecessor, found at https://www.thingiverse.com/thing:2547179. There are two versions available: one with mounting points for a 50X50 radial fan and one without. If using a BL-Touch is desired, a mount is also available. The BLT Rails should be glued to the Hot End Clamp before screwing the BLT Mount to the rails. The STL models have been checked and optimized. Parts requiring different orientations for proper printing are rotated to the preferred printing position. #### The Nimble Extruder With an installed weight of less than 27 grams on your carriage/effector, the Zesty Nimble is the smallest and lightest extruder available, boasting ample torque and multiple mounting options. The Nimble can be obtained from [Zesty Technology.](https://zesty.tech)