New 3DS sun cover and camera blocker
thingiverse
Finally, the perfect solution to block that annoying sun from disrupting your hardcore gaming session! This is a test on the regular/smaller New 3DS only. I'm fed up with those cameras staring back at me and hardly ever use them, so I blocked 'em out for good. Used the following settings: Printer: Anet A8 Prusa i3 Filament: PLA Software: tinkercad.com & Cura Nozzle: 0.4mm Layer Height: 0.2mm Wall Thickness: 0.8mm Top/Bottom Thickness: 0.8mm Infill Density: 20% Print Temp: 210c Plate temp: 60c Diameter: 1.75mm Flow:100% Retraction enabled Retraction speed: 25mm/s Retraction Minimum Travel: 0.8mm Print Speed: 75mm/s Travel Speed: 150mm/s Cooling enabled No supports Brim width: 0mm Printer settings: Printer: Anet A8 Prusa i3 Rafts: Doesn't matter Supports: No Resolution: 0.4mm Infill: 20% Notes: Filament: PLA, Software: tinkercad.com & Cura, Nozzle: 0.4mm, Layer Height: 0.2mm, Wall Thickness: 0.8mm, Top/Bottom Thickness: 0.8mm, Infill Density: 20%, Print Temp: 210c, Plate temp: 60c, Diameter: 1.75mm, Flow:100%, Retraction enabled, Retraction speed: 25mm/s, Retraction Minimum Travel: 0.8mm, Print Speed: 75mm/s, Travel Speed: 150mm/s, Cooling enabled, No supports, Brim width: 0mm
With this file you will be able to print New 3DS sun cover and camera blocker with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on New 3DS sun cover and camera blocker.