Netgear Nighthawk MR100 Hotspot Cooler
prusaprinters
The Netgear MR 1100 hotspot gets hot very easily, and shuts down. This Cooling case is designed to keep it cool even when under heavy load. A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output from the MR 1100. A right angle usb A connector is used to connect the fan to the usb a outlet. Cut the female side of the connector off and connect the Black and Red wires from the USB A male side to the corresponding black and Red wires of the Noctua 40mm fan. The fan runs completely silent using a small amount of power. It can run off the MR100 battery, or while connected to USB C power.Needs 4 x 3.0 x 14mm cap screws to attach the fan to the bottomSee Amazon photos for the fan and the usb connectorItems need to completeUSB connector on amazon https://amzn.to/3mlaOte5 Volt, 40mm Noctua fan on amazon https://amzn.to/3zgTwVO3.0 x 14 mm Cap screws x 4 https://amzn.to/3mihV5sLink to router on Netgear.com https://www.netgear.com/home/mobile-wifi/hotspots/mr1100/
With this file you will be able to print Netgear Nighthawk MR100 Hotspot Cooler with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Netgear Nighthawk MR100 Hotspot Cooler.