Netflix Lemony Snickets A Series of Unfortunate Events Spyglass 3D print model

cgtrader

This is my model of Spyglass from the Series of Unfortunate Events, Spyglass on Netflix. To create this model you'll need 2mm rod for hinge, and five x 2.5mm screw heads. The first four rings spin and click easily. A special place in a toggleable zoom part is designed for 1mm foam or felt if you want even smoother movement. I used wood veneer to make a nice texture on the wood parts, as well as cheap 20x25 monocular optic glass parts. Printing instructions: - Decide if you want to print eye lids with hinges or if you want to print them separately and glue them later for a stronger part. - Print two x meter1. - Print three x meter2. - Print three x arrow1 - Print two x arrow2 - Print seven x spiral. - Print just one of the other parts. Assembly instructions: - Begin putting on and gluing parts to guide in order: spiral -> wood3 -> spiral -> click4 -> ring4 (onto click4) -> spiral -> spiral -> click3 -> ring3 (onto click3) -> -> spiral -> wood2 -> click2 -> ring2 (onto click2) -> spiral -> wood1 -> spiral -> click1 -> ring1 (onto click1) -> eye2. (-Optional: attach the middle hinge to eye1 and two side hinges to eye2, just like in the model with hinges). - Attach the two eye parts together by using a 2mm rod, or you can use a piece of 1.75mm filament. -Glue the spiral end to wood4 part. -Put zoom3 part into zoom2 part .-Put zoom2 part into zoom1 part. -Put zoom1 part into wood4 part. -Glue zoom end to zoom3 part so all parts would stay in place from falling. -Glue all meters onto their places (Use photos as reference). -Glue wood4 with all zoom and meter parts onto guide to close everything. If you're still having a problem with the assembly, feel free to send me a message.