Nest Indoor Wired Camera (2nd Gen) Mount

prusaprinters

<h5>Summary</h5><ul><li>Nest indoor mount.stl is an alternative to the plate included with the camera. Ensure you print with supports on.</li><li>Nest indoor mount threaded.stl is meant to be used with a 1/4" threaded insert, allowing you to attach this camera to more conventional mounts. This should be printed with supports on, however, I've also removed the supports for printing in the hole for the threaded insert, as it's a pain to get out. The depth of the hole is 6mm, while the diameter is 7mm.</li></ul><h5>Printing</h5><ul><li>Nest indoor mount.stl should be printed at 100% infill with conventional supports everywhere (not just touching build plane)</li><li>Nest indoor mount threaded.stl can be printed at 25% infill with conventional supports everywhere (not just touching build plane), but should also have a block of solid, 100% infill, plastic around the hole for the insert.</li></ul>