Nerf Longshot Bolt Base Cup

thingiverse

This is a sealed boltbase or boltcup specifically designed for the Nerf Longshot. The somewhat precise parts may work perfectly based on your printer's tolerances and accuracy. All versions accept 19/32" brass inserts that slide directly over the 9/16" in standard sleeper breeches. They also feature grub screws to swap out boltbases and perform maintenance on the tube by simply drilling through the hole on the part. The "OPEN" files are designed for lipless plunger tubes, which I've only tested with modified stock plunger tubes but theoretically should work with Alpha Kit tubes too. These designs use two o-rings instead of one for a better seal. The "CLOSED" files are designed for tubes with lips - such as stock, artifact, and OMW. I have not tested this with the new Worker tube but imagine it should work just fine. They also use the small-ring on a standard boltbase for sealing. The "stock/artifact" designations are for stock LS and artifact o-rings. I have not tested these with Worker/OMW o-rings. The "hardware" designation is for Danco Company o-rings found at a local hardware store, which has a 1-3/8 X 1 - 3/16 X 3/32 #45 o-ring with STK NO 35759B. It has a 35mm OD that's all you need to know. I also made a compatible boltbase for 1.375" polycarbonate +bow plunger tube material, specifically requested by DV for his LS that I'm making for him. May or may not be doing a NH writeup on this in the future. If you know what you're doing, then you definitely know what you're doing.