Nerdcam3D MK2 Mount

thingiverse

This is a protective cover, case along with a pivot mount for the Nerdcam3D MK2.\nI have it mounted on my rcexplorer tricopter. The camera and tricopter work great together!\nEnjoy\nUpdate I've added a new file called nerdcam3d-mk2_cover_mobius which is a cover with a mount for the Mobius HD camera.\nPrint Settings\nPrinter Brand: \n LulzBot\n \n Printer: \n TAZ 5\n \n Rafts: \n Doesn't Matter\n \n Supports: \n Yes\n \n Resolution: \n .2mm\n \n Infill: \n 100%\n \n Notes: \n I used a .35 nozzle and .42mm print width. The cover wants to warp, so use a thick raft or make sure you get good adhesion to the bed.\nThe cover and mount with clevis require supports.\nThe cover_mobius is a challenging print. It will need a brim, and 1.5mm supports. For best results, print with a .42mm print width and .2mm layer height. I include a breakaway section at the bottom to reduce support requirements and provide a good connection to the brim. However, you will still need supports between the breakaway section and the cover perimeter as there is a .8mm space. So the supports should have a 1 layer gap top and bottom in this space.