Neptune 4 Pro Touch screen stand Elegoo

thingiverse

I designed a stand for my neptune 4 pro printer because the default mounting position was not comfortable for me. It is designed to fit the magnet from the original mount (comes out with two screws), and it has three different height positions. (the middle is the most well weight balanced)I made it in two pieces. The screen holder and the stand, which are screwed together with two 3mm screws.You are going to need 4 screw inserts with external diameter of 4mm (for 3mm screws) and four 3 mm screws, two for the magnet, and two for the stand (original magnet screws can also be used).I have also made two groves on the base to fit exactly two pieces of 3M VHB double sided tape (19mm wide).The hole on the stand is for passing the clip and connect the cable without being seen.The dimensions of the stand without the screen holder are: 91mm width x 112mm height x 84mm depth.Best print orientation for both of them, is as in stl files. Both of them need normal supports (not tree) touching buildplate only.