Neptune 3 Pro Probe Lowering Adapter

thingiverse

This moves the neptune 3 pro bed leveling probe down by 3.25 and over by 3.5. I needed it after an all-metal hotend upgrade caused my nozzle to be too low for the probe to work in the stock location. You will need an M3 screw and M3 nut as well as the original screw that is being used to attach the probe. You need the length of the new M3 screw to be just right. Between 8 and 9mm. I had to cut one down to the right length. First put the nut into the captive hole. Then use the original screw to attach the adapter to the bracket where the probe used to be attached. Finally use a new M3 screw to attach the probe to the adapter, screwing it into the captive nut that was previously installed. Parts this was used with that needed the 3.25mm movement of probe: https://www.amazon.com/dp/B0971FNCM4?ref=ppx_pop_mob_ap_share https://www.amazon.com/dp/B09MTHQQPH?ref=ppx_pop_mob_ap_share