Neopixel progress bar CURA plugin for klipper Voron CoreXY

thingiverse

In original release of this plugin inserted gcode commands are in "R0-255" style. Klipper doesnt understand them and requires neopixel commands in "RED=0-1.00" style. Here is adjusted script for that. Changes: - color code values from 255 into 1.00 - some integers to floats - export format. For installation and usage refer to original things: https://www.thingiverse.com/thing:4614904 https://www.thingiverse.com/thing:4629462 Requirements: Designated neopixel in Klipper's printer.cfg file should be called as : "Neo_stat_bar" Generated inserted code example (violet color): SET_LED LED=Neo_stat_bar INDEX=1 RED=1.00 GREEN=0.00 BLUE=1.00 SET_LED LED=Neo_stat_bar INDEX=2 RED=0.05 GREEN=0.00 BLUE=0.05 Set up in photos is installed on Voron V2.4 printer. There are 2x21 RGB neopixel strips wired in parallel. Strips get power directly from 5V psu (Mean well LRS-50-5) while signal by single line (which is split in to 2, to get parallel control) which comes from control board (BTT SKR 1.4T). Same psu also pawers Raspberry PI 4 which requires up to 3A. White led (24v) are powered directly from SKR 1.4T from hot end port/mosfet. Controlled separately from neopixels. Also as bonus adding my take on adjustable led strip bar. bar_x_2.stl model should be scaled in slicer length wise to accommodate one needs. Designed for led strips insulated with rectangular silicone tube. Hardware: - m3x8 mm bolts (din912 recommended) - m3 nuts (optional) - some type of m3 t-nuts Models: - safety led clip is optional (safety measure for failure of double sided sticky tape) - in names there is multiplier how many copies of that part should be printed. Printed in voron standarts: 4 perimeters, 5 tops and bottoms and 40 infill. ( for thin parts likethese it unintentionaly becomes 100%