Nendoroid/Figma Adapter Mount for IKEA Skadis

prusaprinters

<p>Two models are available:</p><ol><li>Square Adapter Mount <i>(Recommended)</i> - Easier to print and does not require any supports.</li><li>Circular Adapter Mount - Looks better but requires requires additional supports.</li></ol><h4>Printing Instructions</h4><p><i>Note that depending on your slicer, changing the orientation of the prints can alter the size of the hole slightly. The square mount was created with a 4mm diameter hole while the circular mount was created with a 4.1mm diameter hole to account for the expected print orientation.</i></p><p><i>If you're having issues with fitting in the nendo/figma stands in to the hole, let me know and I'll see if I can put different versions.</i></p><h5>Square Adapter Mount</h5><p>Just print as is, no supports needed. Print in the same position as in the gcode to get maximum strength for the joint. Printed at 0.2mm layer height with 15% infill. Increase infill if you want more strength.</p><h5>Circular Adapter Mount</h5><p>Printed at 0.2mm layer height. I recommend the infill to be set to 100% to increase strength of the joint. Add supports as needed.</p>