NCSU phone

thingiverse

Customized Version of Thingiverse: http://www.thingiverse.com/thing:813330 Created with Customizer: http://www.thingiverse.com/apps/customizer/run?thing_id=813330 Instructions for Use: Options Employed: iPhone Version Set to 3 Case Width Fixed at 67mm Width for Alternate Device Adjusted to 58.55mm Include Hooks Removed from Design Corner Radius on Fifth-Scale Model Specified as 8 Units Perimeter Tolerance Applied with Value of .5 Unit Actual Width Defined as 6.17mm Plus Model Perimeter Tolerance Set at .5 Unit Scaled Dimensions of Plus Device Measured as 158.07 Units Case Length Stated as 115.25mm Radius for Pattern Feature Measured as 17 Units Design Mode Identified as Type of Case One Rotation for Image Component Fixed at Zero Degrees Pattern Orientation Established with Angle of Thirteen Degrees Sixth-Scale Model Thickness Specified as 1.5mm Taper Rate on Case Set to Three Units Height for Base Unit Recorded as 9.5 Units Scale Factor Applied to Image Dimension is Seventy-Five Percent Measured Dimensions of Plus Device Identified as 6.75mm High Tolerance for Sixth-Scale Height Adjusted to .2 Unit Design Shape Configured for Pattern Feature Six Sixth-Scale Width Noted as 6.1mm Fifth-Scale Model Measurements Established: width at 58.6mm, height at 7.6 Units, length of 123.8 Units and a corner radius value of eight units. Tolerance values applied to fifth-scale model are height .2 Unit, perimeter .5 Unit. Dimensions of alternate device identified by height as 9.5 Units and taper set to three units. Corner on case for fourth dimension defined by R at value of 8. Pattern shape for design feature six stated with radius measured as 17 Units. Device Dimensions Applied with Case Thickness Specified as 1.8 Unit; actual thickness recorded at five-scale model noted as .6 mm Pattern Taper and pattern dimensions: sixth device identified by corner dimension set at 8 units and taper noted with .2 unit values applied in perimeter tolerance .5 Unit on height, pattern rotation set at 13 units. Alternate case model identified by features with length recorded to value of 138mm; fifth-scale case defined by measurements such as actual width noted as six-point one millimeters. Offsets in model noted with image orientation adjusted zero degrees along x-axis while device position noted on Y-coordinate fixed at zero value. Pattern Dimensions Defined and Established Pattern Dimension Feature Set: type one established Pattern applied: radius twenty-seven units pattern defined feature by dimensions identified for alternate case 58 point seven five millimeters. Offsets Adjusted