Naze32 Casing

thingiverse

Here is my take of the Naze32 case. I attempt to make it as light weight as possible. Print a copy of Case_Lower.stl. If your 6x3 way pins are horizontal (i.e., 90-degree pins), print Case_Upper_H_Pins.stl. If your 6x3 way and 3x2 way pins are vertical, then print Case_Upper_V_Pins.stl. However, if your 6x3 way pins are vertical and 3x2 way pins are horizontal, you should print Case_Upper_H1_V2_Pins.stl instead. Now, shape the screw holes of the upper case using a 3mm drill bit. Next, shape the screw hole of the lower case with a 2.5mm drill bit. Then tape the holes securely with a M3x0.5 Tap. Finally, put your naze32 flight controller inside and screw them together tightly with nylon M3 x 12 countersunk machined screws. You can use metal screws if you don't have nylon ones.