
Nano PI NEO / NEO2 + 2'8 TFT enclosure
pinshape
Nano PI NEO / NEO2 + 2.8 SPI TFT enclosure High-quality, two-part, 2mm-thick walls are optimized for 3D printing and feature no screws or a push button that is easily accessible. The design resembles an old TV. Two variations of each part exist in the first revision: top and bottom. The enclosure comes with either an ETH hole or without one; you can hide a USB WIFI key inside, which is how it's being used. The top part optionally covers the entire push button. There are two types of revisions: Rev 4 features a bottom that is compatible with Rev 3 tops, but they do not cover the screen entirely. The enclosure is also 1mm thicker than the next revision. Rev 5 fully covers all screen parts and the push button with a 0.4mm part, giving it a finished look. The top wall was reduced by 1mm, and an extra 1mm was added to the top band to eliminate light bending issues when inserting the display. The enclosure in the photo is between Rev 4/3 and 5, featuring fully covered screen parts but not the push button. It has a 1mm thick wall similar to Rev 4, which displays some slight bending that was fixed in Rev 5. The top band covering the screen is also 1mm thicker than in Rev 5, causing it to warp slightly; this issue was resolved in Rev 5. The designs are printed with PETG.
With this file you will be able to print Nano PI NEO / NEO2 + 2'8 TFT enclosure with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Nano PI NEO / NEO2 + 2'8 TFT enclosure.