Nano AIO aquarium conversion kit

prusaprinters

This product is a culmination of couple of years of research and few months of iterative design and prototyping.Convert your new or existing aquarium to an all-in-one fish tank. As you know, AIO tanks are very expensive, but with this, you can make your own easily, and on a budget. Suitable for both freshwater and saltwater/reef aquariums.Furthermore, the design is such, that instead of taking an entire wall of your fish tank (like all other AIO do) It sits in a corner, taking minimal amount of space. It's designed to print with no supports required!It consists of three chambers, one for the physical filter media, like sponges and filter floss, one for biological media, such as Seachem Matrix or similar, and one for the pump.Very easy to mount. First, make sure that the tank wall is clean. Then apply aquarium silicone to the back sides, few generous blobs here and there will do just fine. If your tank is empty, it's easiest to lay it on the side that you will be applying the filter to. If not, prop it up with something so that it stays in its place while it cures. Press gently towards the walls (mount about 1cm from the top of the aquarium). After application, leave it to cure for at least 24H, but for best results, leave it to cure and dry for 2-3 days before you put in any water into your tank.Dimensions: (WxDXH) 130x105x200mm.Pump chamber (WxDxH) 78x60x198mmRecommended pump is Eheim CompactOn, but any pump that fits will work just fine.Nozzle opening is 19.2mm, which will fit most nozzles, although nozzles for the Fluval Flex series works best. In such case, you will also need a small amount of 12/16mm hose.Print standing, with a brim, no supports. Print in PETG.